JOSKIN TRANS-KTP 27/65

JOSKIN

TRANS-KTP 27/65

Neu

B09217/650

Trans-KTP 27/65 TRM construction tipping trailer European certification for 27 t maximum permissible axle load (+ 3/4 t at the eyelet) at 40 km/h for triple-axle vehicle (cat. R) Hydropneumatic drawbar (DA) instead of sprung drawbar, drawbar with silentblocks or simplified hydraulic drawbar (suspension when vehicle loaded and unloaded) Air brakes in proportion to the load for vehicle with hydraulic axle suspension (air brakes compulsory) LED end outline marker lamps and side marker lights Knee-joint eyelet (Ø 50 mm) for hitching rod of self-steering axle Low-flow electro-hydraulic control - all except hydraulic motor (macerator, turbo, chopper) (entry block compulsory) - per function Galvanised front extension Front 64-l tipping cylinder instead of standard on 27/65 (option 628 compulsory) Wheels 650/55R26.5 (NOKIAN) CT 177 D (Ø 1,389 x 645 mm, 9,950 kg per wheel at 40 km/h and 6 bar) instead of 400R22.5 700 mm narrow chassis for Trans-KTP 27/65 TRM (front extension (ref. 628) and 64 l front tipping cylinder (ref. 1799) compulsory) (2.55 m total width with wheels of max. 650 mm wide, excl. dual brakes) Air brakes with spring cylinders instead of standard parking brake (air brakes compulsory) JOSKIN 80 mm knee-joint eyelet 4 T instead of 3 T (large plate) UPD low-flow universal entry block (flow rate: max. 70 l/min) to supply the solenoid valves and Load Sensing system (signal plug) - only available with ''low-flow'' hydraulic functions and 1 deviator (1 x 5506) - not available on CARGO and incompatible with ref. 1880 2 rear LED work lights + LED flash bar (with control via in-cab box or ISOBUS button (ISOBUS configuration required)) Suppression of the manual 6-way valve for operating the skid with direct connection to the tractor Manual slope position adjustment - control and display on the tractor's ISOBUS screen (additional screen available as an option), level indicator (arrow) on the front of the body and automatic height-adjustment (Hydro-Pendul suspension, entry block and ISOBUS compulsory). Hydro-Pendul on tipping trailer 27/65: hydraulic (DA) axle suspension (with ball joint) - (front extension (ref. 628) and 64-l front tipping cylinder (ref. 1799) compulsory) Automatic height adjustment of the hydropneumatic drawbar without ISOBUS (ref. 1782 or 3663 compulsory) - incompatible with simplified hydraulic drawbar Special offer for Outlet machine. ''Outlet'' machines are likely to have certain visible imperfections that have no effect on the machine's operation, and will not be covered by the warranty.