JOSKIN QUADRA 20000TS

JOSKIN

QUADRA 20000TS

Neu

T33572/200

QUADRA 20000 TS Specification details 0042S-D 1.00 ST QUADRA 20000 TS slurry tanker type Germany with STORM emptying centrifugal pump 715 1.00 ST Self steering axle - including hitching yoke, aligning set-up unit with 2 nitrogen accumulators, oil tank, hand pump and pressure gauge instead of free steering axle 305 1.00 ST Load transfer on double articulation (hydropneumatic hitching suspension compulsory) (axle Ø on tractor side must be mentioned: Ø 32 mm, Ø 37,5 mm or Ø 40,5 mm) 1775 1.00 ST Wheels base: 1.820 mm instead of 1.550 mm with Hydro-Tandem or Hydro- Tridem (FORBIDDEN with fixed axles) - COMPULSORY for wheels with a Ø from 1.601 to 1.675 mm 2203 2.00 ST Wheels 750/60R30.5 (TRELLEBORG) Twin Radial 181 D (Ø 1.678 x 790 mm, 11.200 kg per wheel at 40 km/h and 4 bar) instead of 400R22.5 114 1.00 ST Air brakes in proportion to the load for vehicle with hydraulic axle suspension (air brakes compulsory) 937 1.00 ST 2 LED rear working lights + flashing beacon (with control box in the cabin) 1779 1.00 ST Hydraulic drive (Power Pack) with flow meter instead of standard STORM assembly including: - HP hydraulic installation (160 l/min and 280 bar) with P.T.O.-driven pump for the hydraulic drive of the centrifugal spreading pump and filling pump; - option 2246: ISOBUS components on the machine side with DPA (for control of the electrovalves, option 2247 compulsory) WARNING: compatible tractor terminal or JOSKIN terminal to be taken additionally (ref. 5609, 3779 or 3828). 1341 1.00 ST Dorsal boom recessing - lowered by approx. 250 mm (incompatible with booms) (reduction of the volume by approx. 300 l) 1856 1.00 ST Telescopic dorsal boom extension (+/- 1 m) - including low-flow electrohydraulic control (ref. 1782) - 3rd articulation compulsory (ref. 2256) 012 1.00 ST Ø 6" (150 mm) communicating gauge (transparent perspex tube) instead of standard indicator 1478 1.00 ST Protective grate for the communicating gauge (option 012 compulsory) 025 2.00 ST Ø 6" (150 mm) filling valve with Perrot rocking jaw 336 1.00 ST Turbo-filler (SA + FR) for Ø 200 mm pumping tools (with Ø 100 mm pressure gauge) 103 1.00 ST Dorsal boom with pivoting point at the back of the tank including: - Ø 200 mm industrial anti-blocking valve (DA); - safety switch preventing the dorsal boom from completely turning several times in the same direction; - F12 joystick F12 for electrohydraulic control (ref. 2249 compulsory on tankers with ISOBUS equipment); - 2 hydraulic articulating points; - 4 low-flow electrohydraulic controls (4 x 1782); - centralised lubrication with rod with greasing point(s) at man's height (EC-standard). WARNING: entry block compulsory. 1342 1.00 ST Housing for dorsal boom on the right (compulsory with ref. 5417) 1865 1.00 ST Pre-equipment for hydraulic door (500 x 600 mm) - including pre-equipment for inner and outer ladders 1841 1.00 ST Knee-joint eyelet (Ø 50 mm) for hitching rod of self-steering axle 1782 7.00 ST Low-flow electro-hydraulic control - everything except hydraulic motor (macerator, turbo, chopper) (entry block compulsory) - per function 1880 2.00 ST High-flow electro-hydraulic control (necessary for macerator(s), turbo, chopper, mixer and tyres remote inflating control) (option 1871 compulsory) - per function 2247 13.00 ST Extra cost for every hydraulic function (low and high flow) if ISOBUS control (ISOBUS F24 joystick: ref. 2248 highly recommended). ATTENTION: in addition to the usual electro-hydraulic controls. Notes: - Polymatic block with SOLODISC automatically replaced by Isomatic. - incompatible with Easymatic and Easymatic+. 2248 1.00 ST Joystick ISOBUS F24 (24 functions on buttons / function AUX-N) for the control of the electro-hydraulic functions (ISOBUS or AUTOMATE compulsory) 2249 1.00 ST Extra cost dorsal boom control on ISOBUS including ISOBUS F24 joystick (ref. 2248) insted of standard joystick F12 and electro-hydraulic functions (ref. 2247) - option 2246 or 3272 compulsory 2256 1.00 ST 3rd articulation by hydraulic cylinder - including low-flow electrohydraulic control (ref. 1782) - compulsory with high-performance submerged filling turbine (ref. 5417) 2269 1.00 ST JOSKIN Ø 80 mm 3 T knee-joint eyelet instead of Rockinger Ø 40 mm bolted flat eyelet (large plate) 3058 2.00 ST Pre-equipment for tyre inflation system including the pre-bored axles, weldings for the compressor support, hydraulic hoses (ref. 1880,1515 or 5506 compulsory) - price per axle 3119 1.00 ST §Extra cost for working lights with LED bulbs instead of standard lights (working lights compulsory) 3292 1.00 ST Lights with double LED bulb instead of incandescent light bulbs (LED only available for brake and main-beam lights) (double lights compatible with LED compulsory) 3293 1.00 ST Basic kit for ISOBUS management of the section control (pneumatic or with hydraulic pincers) including calculator and cables (section control compulsory to be taken additionally) (ISOBUS terminal not included). WARNING: with pneumatic section control, air brakes or ref. 3744 compulsory. 3573 1.00 ST Ø 6" (150 mm) flat hydraulic valve (SA) on the dorsal boom housing combined with the rear valve of the tanker (opening and closing the valve at the same time as the rear valve) 3790 1.00 ST VOGELSANG pre-equipment for QUADRA, X-TREM, EUROLINER, Vacu-CARGO and VOLUMETRA (WARNING: special drain hose to be fitted on the tractor free return) - including AUTOMATE 1+3 kit instead of the rear valve and standard scatterer 3830 1.00 ST STORM+ assembly on Power Pack hydraulic installation with: - DL 180 pump (filter, temperature alarm and level float gauge included) WARNING: reduction of up to +/- 400 l of the tank volume depending on the tank diameter; - hydraulic control of pump change over; - side pump stand; - hydraulic drive of the filling pump through the Power Pack circuit by means of a high-flow electrovalve (320 bar). WARNING: - option 1779 compulsory (Power Pack with ISOBUS DPA flow meter); - without the upper access with manual opening; - compatible with turbo-filler (control with direct connection to the tractor, on ref. 1515 or on ref. 1880). 3079 1.00 ST Tank emptying system through dorsal boom (discharge hose included)