Beschreibung
.Nationwide shipping!
WL250 Wheel Loader: The ideal entry-level model
The WL250 wheel loader has an overall lower height and compact dimensions. As a result, the machine can pass through clearance heights of below 2 m without the need to fold down the operator's canopy. The machine’s low center of gravity ensures very good stability and allows the handling of heavy loads. The wheel hub drive also includes the powerful and efficient drive concept, with which all four wheels are directly driven. This purely hydraulic wheel hub drive ensures an increase in efficiency, excellent acceleration, and therefore enables a responsive driving behavior as well as high thrust power.
The 3-cylinder common rail engine is characterized by its high level of torque and efficiency. As no exhaust after-treatment is required for this engine, the maintenance costs are automatically reduced.
The kinematics are adapted to the size of the machine - this ensures optimum force ratios and maximum productivity for every machine.
Wacker Neuson wheel loaders are designed with short hydraulic hose lengths in mind, and the hoses are split at several points. Therefore, if a hydraulic hose needs replacing, only the affected part will need to be replaced, not the entire hose in the hydraulic circuit. This speeds up repair times enormously and is also cost-efficient.
Motor type 403 J-17
Cylinder 3
Drive output 18,4 kW
Drive output 25 PS
At max. rpm 2.800 U/min
Cylinder capacity 1.663 cm³
Type of coolant Water
Exhaust standard level V
Exhaust aftertreatment -
Operating voltage 12 V
Battery 77 Ah
Operating weight 1.800- 2.250 kg
Thrust force (max.) 2.069- 2.582 daN
Lift capacity (max.) 1.779- 2.395 daNSpezifikation
Jahr2026
HerstellerWACKER NEUSON
ModellWL250
Stunden0
ZustandNeu
Idle Hours1
Stundenzählergenau / geprüft
ÜberrollschutzGeschlossen
HeizungJa
Leistung18.64 kW
Jahr2026|
HerstellerWACKER NEUSON|
ModellWL250|
Stunden0|
ZustandNeu|
Idle Hours1|
Stundenzählergenau / geprüft|
ÜberrollschutzGeschlossen|
HeizungJa|
Leistung18.64 kW|
